[email protected]

Alloy 625 equivalent Inconel 625 Manufacturer Supplier

Inconel 625 is an oxidation and corrosion resistant nickel alloy, which is used for its excellent and high strength aqueous corrosion resistance. In addition, it is a Nickel-Chromium-Molybdenum alloy with outstanding, being particularly resistant to crevice as well as pitting corrosion. It is a wonderful choice for sea water applications. Alloy 625 sheet, bar and plate - AMS 5599, 5666 - Inconel

  • IntroductionPropertiesApplicationsUsesVariationsFutureUsersPurposeThe patent for Inconel 625 was issued on December 8th, 1964 after long years of research into a Ni-Cr-Mo-Nb alloy (Nickel Chromium Molybdenum Niobium). It is a so-called superalloy, because of its ability to withstand high temperatures, stress and corrosion. Originally developed for high pressure steam lines in power plants, it quickly became apparent that alloy 625 could handle extreme corrosion and oxidation from harsh environments. Molybdenum, chromium, and niobium give this alloy additional creep strengtInconel 625 Plates, Alloy 625 Sheets, Inconel Alloy 625 The outstanding and versatile corrosion resistance of Inconel UNS N06625 Sheets Plates under a wide range of temperatures and pressures is a primary reason for its wide acceptance in the chemical processing field. Nickel Alloy 625 Sheets is often used in Aircraft ducting systems, Jet engine exhaust systems and Engine thrust reverser systems.

    China Alloy Inconel 625 Nickel Strip (UNS N06625/W. Nr 2

    Inconel 625 Strip, Inconel 625 Strips, Inconel 601 Strip manufacturer / supplier in China, offering Alloy Inconel 625 Nickel Strip (UNS N06625/W. Nr 2.4856), 0.005mm Ultra-Thin Karma Foil/Evanohm Foil/Constantan Foil/Nickel Foil for Etching Resistance, 6j22/6j23/Constantan/Karma Soft Wire for Strain Gages and so on. Experienced supplier of W.Nr.2.4856,UNS NO6625,Inconel 625Features:Inconel 625 has excellent strength at temperatures up to 816. At higher temperatures, its strength is generally lower than that of other solid solution strengthened alloys. Inconel 625 has good oxidation resistance at temperatures up to 980 and shows good resistance to aqueous corrosion, but is relatively moderate compared to other more capable corrosion resistant alloys. INCONEL 625 (Alloy 625, 2.4856, UNS N06625) ZormetalINCONEL 625 (Alloy 625, 2.4856, UNS N06625) The Inconel 625 is a Nickel-Chromium-Molybdenum alloy with excellent resistance to many corrosion environments. In particular, the resistance to tingling and crevice corrosion is very high. It is a highly preferred alloy for sea water applications.

    Inconel 625 - Triton Metal & Alloys

    INCONEL nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Composition is shown in Table. Inconel 625 Forgings Alloy 625 Weldaloy Specialty Inconel 625 is a superalloy that is used for its high strength and resistance to pressure, oxidation and corrosion. When used in high temperature applications, this alloy creates a protective oxide layer that enhances its heat-resistance. For applications that need strength or corrosion resistance, Inconel 625 is a multi-use and durable choice. Inconel 625 Metal Equipment - nanomagtechInconel 625 Inconel 625 (UNS N06625) Inconel 625, also known as Alloy 625, is a nickel alloy that is known for its impeccable strength and resistance against aqueous corrosion. Alloy 625 is a nonmagnetic corrosion and oxidation resistant alloy that is used both for its high strength and outstanding aqueous corrosion resistance.

    Inconel 625 Nickel Alloy -- Itroduction & Data Sheet

    Introduction Overview. INCONEL® nickel-chromium alloy 625 (UNS N06625/W.Nr. 2.4856) is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). Strength of INCONEL alloy 625 is derived from the stiffening effect of molybdenum and niobium on its nickel-chromium matrix; thus Inconel 625 Strip Inconel 625 Wire Inconel Alloy 625 SheetInconel 625 Industrial Nomenclatures:Inconel 625, Chornin 625, Altemp 625, Nickelvac 625, Haynes 625, Nicrofer 6020, W.Nr 2.4856, AWS 012,UNS N06625. Inconel 625 is a high strength material with supreme corrosion and oxidation resistance properties. Therefore, it is recommended for use in the aerospace and chemical processing industries. Inconel® 625 Fasteners Corrosion Resistant Industrial Inconel 625 is an austenitic, nickel-based super alloy. The high content of molybdenum and niobium reinforces the chromium nickel matrix of the Alloy 625 Hex Bolts. In addition to this, adding these two elements in the Alloy 625 Bolts eliminates the need for precipitation-hardening treatments as the Inconel 625 Bolts impart a stiffening effect.

    NAS625 -

    NAS625 (NCF625, UNS N06625) is a nickel-chromium-molybdenum alloy with an additional of niobium. Matrix stiffening provided by molybdenum and niobium results in high strength. The alloy resists a wide range of severe corrosion environments. It also offers resistance to high temperatures. Uses include parts in chemical and garbage incinerator Inconel 625 Nickel Alloy - AMS 5666 - UNS N06625625 Nickel Alloy - AMS 5666 - UNS N06625. Nickel Alloy 625, frequently called Inconel ® 625, is a corrosion and heat-resistant Nickel-based alloy. It is alloyed with Chromium and Iron, along with Niobium-Tantalum and Molybdenum for increased toughness and strength. It is nonmagnetic, and corrosion and oxidation-resistant, with service